BREAKING & SPREADING STRAW
The primary purpose of the Strawmaster® is to breakup and spread most types of straw residue efficiently. For most farming practices, speeds of up to 12 m.p.h. can be attained.

RAKING
The Strawmaster® is quickly becoming the most popular machine for raking flax straw. It can maximize holding capacity by applying pressure through the spring bar control.

GROUND CONTOURING
Under float or under pressure, the harrow sections are designed for flexibility. The spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The spring bars can then flex in response, rising over hills and falling into hollows.

FOUR OR FIVE BAR SECTIONS
The tine bar sections are available in either a four bar section with 5/8” x 26 inch straight tines or a five bar section with either 5/8” or 9/16” straight tines.

PATENTED SPRING BAR CONTROL
At the heart of every Strawmaster® is the simple torsional spring bar design. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. As well, the spring bars support the entire harrow in transport. Advantage: The Strawmaster® has zero moving parts on the harrow section.

CHEMICAL & SEED INCORPORATION
Incorporation is a natural for the Strawmaster®. By adding a Valmar Granular Applicator, both granular chemicals and seed are evenly distributed.

FIELD PACKING
Moderate field packing can be easily achieved by lowering the machine and leaning back the tines.

ON THE GO HYDRAULIC CONTROL
Optional hydraulic rephasing cylinders are available that replace our standard gear driven jacks. These cylinders help to synchronize the angle adjustment and provide consistent pressure for every section.