Available to order now. Contact your local Degelman Dealer for more information. 

The Strawmaster X Disc Harrow, with disc on command technology gives you the ability to cover large acres at high speeds in a large working width. Built off the impressive Strawmaster+ frame, the design allows for more tillage then a traditional heavy harrow, but less aggressive than a high speed disc.  The Strawmaster X will size residue, while still leaving some standing material to catch snow.


Discs on Command

The Adjustable angle of 0 – 15 degrees on the discs give you the ability to blacken the soil which warms up the field quicker in spring for seeding, speeds up drying on wetter years and allows material to break down over winter.

In drier years, lift the discs out of the way and use as a traditional 4 bar harrow.

Product Image

Product Image

Get To Work

Get in and out of the field quicker than ever before. The inboard transport/wing wheel assembly features large floatation tires (500/60-22.5) that hydraulically operate to make sure you're back to work faster than ever before. 

The Strawmaster X transport width of 12-6” and height of 13' 6" makes getting down grid roads safer and easier. The unique end wheel design follows the tractor better than traditional harrows, making it easier to turn into more narrow approaches. 

 

Simple Disc Harrow Design

After years of testing we have found that one row of 20” discs at 10” spacing combined with 4 bar harrow sections equipped with 30” tines (that's the same as our Strawmaster Pro) resists plugging in wet conditions and allows material to flow through the machine more freely. 

Engineered and Built Tough

At the heart of the machine are the robust 10x10 wing beams. These provide consistent beam torque and tine pressure throughout the machine, and help spread straw evenly for a more consistent field finish. 


The Strawmaster X is designed to adapt
to your unique conditions. 

Setting Indicators

There are three setting indicators on the Strawmaster X. One for cart height, one for beam torsion and one for tine angle. Knowing exactly how your machine is running is key when getting your desired field finish. 


 

 

 

Disc Angle Adjustments

Having the option to change the disc angle allows you to use the machine in various conditions.

0-4 degrees with a coulter disc will allow you to open the ground and cut trash with minimal soil disruption.

5-7 degrees is good for mixing some dirt with residue while loosening the soil but still leave stubble standing to catch snow.

8-10 degrees is perfect for working low spots with high trash and for drying them out.


DISC OPTIONS

Wave Samurai

  • Good for cutting heavy trash and mixing soil while incorporating
  • Extremely aggressive edge maintains penetration and wear
  • Fluted disc allows blade to turn in heavy residue
  • 4 to 10 degrees, can be angled more aggressively if needed

 

5 Wave Notched

  • Good for maximum coverage and mixing soil at shallow working depth
  • 4”wave assist disc to turn in extreme conditions
  • Notches help disc penetrate and size material
  • Maintains constant cutting angle as it wears
  • 0 to 10 degrees

 

Curved Wave VT

  • Good for opening ground and cutting with minimal soil disruption
  • Soil razor edge cuts aggressively with good wear characteristics
  • Curved waves allows blade to turn in heavy residue without turning soil over
  • 0 to 4 degrees, should not be angled aggressively

 

Flattened Double V

  • Good for cutting/sizing trash and incorporating
  • Aggressive edge maintains penetration and wear
  • Double V provides a smoother furrow
  • 2 to 10 degrees, can be used more aggressively if needed

 

 


Specifications

Model SMX70 SMX50
Width 70' 50'
Weight 35,640 lbs 27,300 lbs
Horsepower(min) 500 400
Horsepower(ideal) 550 450
Transport length 55' 42' 3"
Harrow sections 7 5
Wing beam 10"x10"x1/4"  
Cross joints 2 1/2" vertical 3" horizontal  
Tires 560/60R22.5 | 500/60R22.5  
Hitch weight -790 lbs  -650 lbs
Transport width 12'6" 13' 4"
Transport height 13'6" 13' 10
Trailer frame 6"x10"x3/8" & 4"x10"x1/2"  
Rows of tines 4  
Disc Spacing 10"  
Disc Size 20"  
Disc Angle 0° - 10° variable  

 

Product Image

Engineered Tough